Once you’ve tried your hand at the process, you can begin to explore adjusting oils or adding scents or texture with herbs or essential oils. Juniper and cedarwood beer soap recipe;
Sensitive skin shea butter soap.
Lye soap recipe coconut oil. I might have the proportions off = i cannot find the site now. Blend the oils and liquid in. Once lye and water is clear, it’s ready for the oil.
Ingredients here are taken from my basic soap recipe, we simply multiply the grams of each oil by the sap value in the chart below. Each oil uses lye differently so you need to do this every time you change your lye soap recipe and add or take away oils. 146 grams lye (sodium hydroxide) 380 grams distilled water ;
5 oz palm kernel oil; Adding tangerine essential oil, made the soap a pretty yellow. Mix the soap until it reaches a light trace, which refers to the point at which the soap is about as thick as thin cake batter and there are no streaks of oil left in the mix.
Different oils have different value when producing soap. When both the lye and the oils are at about 100 f, slowly pour the lye solution into the oils. Cool oils to approximately 110 degrees f, measured with the second candy thermometer.
Use whichever salt you desire, as long. If we take a look at the naoh weights we can see how it takes a lot more lye to saponify 219g of coconut oil than to saponify 219g of lanolin. You’ll notice that the lye kind of hardens or crystallizes.
Here are some of my favorite recipes featuring coconut oil. Diy activated charcoal soap recipe. Heat oils over low heat on the stove top, and stir gently with the second wooden spoon until melted.
Facial soap at 20ercent superfat: Soap recipes using coconut oil. Turn off the heat and remove the pot from the stove top.
This soap recipe is perfect for those with sensitive skin. I believe the original recipe/formula was 75% coconut oil & 25% cocoa butter made with milk instead of water. Dead sea mud and argan oil facial bar
Avocado oil is extremely soothing and hydrating to keep your skin from drying out, and the coconut oil makes a super bubbly soft lather. The liquid is caustic, so make sure not to touch it or breathe in any fumes. 6.) hardening the soap batter in a mold.
The first step of making lye soap is to measure the lye and water in two separate stainless steel bowls, using a kitchen scale. Olive oil (35%) 8 oz. Check temperature of coconut oil.
This recipe has been superfatted at 20%. Everything is measured by weight. If we were to swap the coconut oil for an oil that requires less lye without adjusting our calculation, our soap would end up with with an excess of.
Laundry soap at zero percent superfat: This is how it will look once complete. Weigh olive oil, coconut oil and palm oil into the stainless steel pot.
30 to 50 grams of your favorite essential oils or fragrance oils (you will need a bottle of 30 to 60 milliiitres the equivalent of 1 to 2 fluid ounces). It’s always good to have a helper! Add lye mixture to coconut oil and blend.
It shifted to 100% coconut oil soap for many. Olive oil is a gentle moisturizer, coconut oil adds lather, and palm oil hardens well. Pick your essential oil scents.
Once melted, add the lye/liquid mixture to the oils in the crock pot and stir. Quickly add to loaf pan. 5.) adding in any essential oils or exfoliants.
This lye soap recipe is one of my most basic homemade soap recipes. “break the rules” as the name of a very high coconut oil soap was introduced to soaping forums around 2007. As always, when substituting oils, be sure to run your new recipe through a lye calculator to get your new lye amount.
Then, combine them by pouring the lye into the water, stirring the mixture until the lye fully dissolves in the water. Any equipment the lye touches needs to be neutralized in a mixture of white vinegar, soap, and water.) after a brief stir, grab your stick blender and get to work! Most of the recipes here on lovinsoap.com use coconut oil!
1.) melting the solid oils, 2.) mixing them with the liquid oils, 3.) mixing your water and lye together, 4.) combining the water mixture with the oil mixture until it reaches trace. How to make coconut oil soap. Castor oil (5%) 1 tsp pure salt with no additive (even other minerals) 11.4 oz.
Put on your rubber gloves, long sleeved shirt and eye/face protection. Stir the mixture with a stick blender, alternating short blasts of the blender and stirring. Total lye required to saponify oils = 152.2g
Be careful not to splash. Coconut oil (33%) 10.5 oz. Additive and scent at light trace.